0
Authorized Canadian Distributor & Service Centre
Your Cart
(empty)
Cart : (empty)

GPT-15003 - AC 500VA AC/DC/IR Electrical Safety Analyzer

AC 500VA AC/DC/IR Electrical Safety Analyzer

GW Instek

Category : Safety / Testing / Compliance Instr.

by quote only Add to Cart

Documents:
Datasheet

Overview
Features
Information
Calibration

GW Instek introduces the flagship model (500VA output capacity) safety analyzer-the GPT-15000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.

 

Analyze Your Safety Tests
 

  • Meets IEC 61010-2-034 design requirements
  • High Accuracy and High Resolution Testing Performance
  • Flexible supplementary testing mechanism
  • Statistic and analysis
  • Sweep and tabular automatic test
  • Complete test data retrieval interface
  • 500VA AC Test Capacity (short circuit current > 200 mA)
  • Comply with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF
  • Statistics & Analysis Function
  • Sweep Function for DUT Characteristic Analysis
  • Convenience Listed AUTO mode easy to read result & judge
  • Internal Storage & USB Storage available
  • Barcode Function available
  • Setting Data Export / Import
  • Rear panel output available
  • Interface : RS-232C, USB host/device, Signal I/O and option GPIB or LAN
  • Universal power input

 

Interface

LANOption
GPIBOption
Signal I/OStandard
USB deviceStandard
RS-232CStandard
Rear OutputStandard
USB host (Front)Standard
REMOTE (Front) terminal Standard

 

Memory

Automatic Testing MemoryAUTO：100 blocks, manu per auto：10
Single Step MemoryMANU：100 blocks

 

Continuity Test

Timer Accuracy± (100ppm + 20ms)
Timer (Test Time)*0.3s~999.9s
Window Comparator MethodYes
Ohmmeter Measurement Accuracy± (10% of reading + 2Ω)
Ohmmeter Measurement Resolution0.01Ω
Ohmmeter Measurement Range0.10Ω~ 70.00Ω
Output-Current100mA dc (fixed)

* When Ground Mode is “ON”, the measurement range is 30GΩ max. and adding 10% error for accuracy.

 

Ground Bond

GNDOn / Off
Test MethodFour Terminal
TIMER Accuracy± (100ppm + 20ms)
TIMER (Test Time) 0.3s~999.9s
Window Comparator MethodYes
Ohmmeter Measurement Accuracy± (1% of reading + 2 mΩ)
Ohmmeter Measurement Resolution0.1mΩ
Ohmmeter Measurement Range 1mΩ~ 650mΩ
Test-Voltage Frequency50Hz/60Hz selectable
Test-Voltage8Vac max (open circuit)
Output-Current Accuracy3A≦ I≦ 8A：±(1% of reading + 0.2A)
8A
Output-Current Resolution0.01A
Output-Current03.00A~32.00A ac

 

Insulation Resistance

GNDOn / Off
Wait Time0.0s~999.9s
TIMER Accuracy± (100ppm + 20ms)
TIMER (Test Time)*OFF, 0.3s~999.9s
RAMP DOWN (Fall Time) 0.0s~999.9s
RAMP UP (Rise Time) 0.1s~999.9s
Window Comparator MethodYes
Output Impedance 2kΩ
Short-Circuit Current10mA max.
Voltmeter Accuracy± (1% of reading + 5V)
Voltage Regulation± (1% + 5V) [maximum rated load → no load]
Resistance Measurement
Output-Voltage Accuracy± (1% of setting + 5V) [no load]
Output-Voltage Resolution 50V
Output Voltage50V~1200V dc

* When Ground Mode is “ON”, the measurement range is 30GΩ max. and adding 10% error for accuracy.

 

DC Withstanding

GNDOn / Off
WAIT TIME0.0s~999.9s
TIMER Accuracy± (100ppm + 20ms)
TIMER (Test Time)*OFF, 0.3s~999.9s
RAMP DOWN (Fall Time) 0.0s~999.9s
RAMP UP (Rise Time)0.1s~999.9s
ARC DetectYes
Window Comparator MethodYes
Current Offset5μA Maximum
Current Measurement Accuracy ± (1.5% of reading + 3μA) when I Reading < 1mA
± (1.5% of reading + 30μA) when I Reading ≧1mA
Current Best Resolution0.1μA /1μA /10μA
Current Measurement Range1μA~20.00mA
Voltmeter Accuracy± (1% of reading + 5V)
Voltage Regulation± (1% + 5V) [maximum rated load → no load]
Maximum Rated Current20mA (0.5kV< V ≦6kV) 2mA
0.05kV≦ V ≦0.5kV)
Maximum Rated Load100W (5kV/20mA)
Output-Voltage Accuracy± (1% of setting + 5V) [no load]
Output-Voltage Resolution1V
Output-Voltage Range 0.050kV~6.000kV

* When Ground Mode is “ON”, the measurement range is 30GΩ max. and adding 10% error for accuracy.

 

AC Withstanding

GNDOn / Off
WAIT TIME0.0s~999.9s
TIMER Accuracy ± (100ppm + 20ms)
TIMER (Test Time)*OFF, 0.3s~999.9s
RAMP DOWN (Fall Time) 0.0s~999.9s
RAMP UP (Rise Time) 0.1s~999.9s
ARC DetectYes
Window Comparator MethodYes
Current Measurement Accuracy± (1.5% of reading + 30μA)
Current Best Resolution1μA / 10μA / 100μA
Current Measurement Range1μA~100.0mA
Voltmeter Accuracy± (1% of reading + 5V)
Voltage Regulation± (1% + 5V) [maximum rated load → no load]
Output-Voltage Frequency50 Hz / 60 Hz selectable
Output-Voltage WaveformSine Wave
Maximum Rated Current 100mA (0.5kV< V ≦5kV) 10mA
(0.05kV≦ V ≦0.5kV)
Maximum Rated Load500 VA (5kV/100mA)
Output-Voltage Accuracy ± (1% of setting + 5V) [no load]
Output-Voltage Resolution1V
Output-Voltage Range0.050kV~5.000kV

* When Ground Mode is “ON”, the measurement range is 30GΩ max. and adding 10% error for accuracy.

 

General

Dimension & Weight380(W) x 148(H) x 492(D) mm; Approx. 17kg
Power SourceAC 100V~240V ± 10%, 50Hz/60Hz
Display7" color LCD
Ground Continuity√
Ground Bond-----
Insulation Resistance√
DC Withstanding√
AC Withstanding√*

* : Short current > 200mA

Do you have a AC 500VA AC/DC/IR Electrical Safety Analyzer that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your AC 500VA AC/DC/IR Electrical Safety Analyzer calibrated today! Click Here!